Join Our PowerPlay Line for Special Discounts!
STEP 1) Attach the top of the tarp using the metal grommets to a standard 2x4 that is as long as the width you want to install the tarp to. The width of the Sniper's Edge is 16 feet, but it can be installed to a width less than that if you would like. In this case, you would use a 2x4 of a length equal to the width you want to install the Sniper's Edge to.
STEP 2) Once you have the 2x4, align and attach the top of the tarp to the 4 inch side of the 2x4 using the 9 metal grommets and standard screws and washers. One inch screws work fine. When attaching the tarp, don't forget to capture the included bungee ball cords between the tarp and the 2x4 on the 2nd, 4th, 6th and 8th grommets starting from the left.
STEP 3) Next use two eye or hook screws. At each end of the 2x4, in the 2 inch side, you will screw in an eye/hook screw. When the tarp is hanging the eye/hook screws will be pointing up towards the ceiling.
STEP 4) The final step is to use the eye/hook screws to hang the 2x4 from the ceiling. Again use either an eye/hook screw in two places in the ceiling. Then use 2 sections of rope, cable or chain to hang the 2x4 from the ceiling. You do not need to use very heavy rope, chain or cable as the total weight of the tarp is only 23 pounds plus about another 20 pounds for the 2x4.
Shopping Cart Powered by Volusion.